uPVC door handles
A new uPVC door lever handle is about €27 to buy, and fitting one is a few minutes with a screwdriver once you have the right size. To get the right one, measure the screw centres and the distance from the spindle to the keyhole.
How to measure for a new handle, what lever and pad mean and when the lock is the problem.
Free and no obligation. Your request goes to one door fitter in your county, not a list.
- about €27a lever handle, to buy
- 92 mmthe most common PZ
- 215 mma very common screw centre
- 8 mmthe usual square spindle

The two measurements
Measure two things before you buy a handle:
- Screw centresfrom the middle of the top fixing screw to the middle of the bottom one. 122, 211 and 215 mm are common, and 215 is very common on modern doors.
- PZfrom the middle of the spindle hole to the middle of the keyhole. 92 mm is the most common for modern multi-point locks, and 68 and 70 mm also turn up.
Most uPVC handles use an 8 mm square spindle.
Price your door
Three taps and the price shows as you go. Your name and number come last, and only if you want a fitter to price it.
A repair, lock or handle, door only, supplied and fitted: Priced on a visit.
How the price is worked out
The figure is what Irish fitters and price guides give for that door fitted, or for fitting alone if you already have the door. Side panels are on top of it. Where nobody publishes a figure, it reads priced on a visit. Use it to plan with. It isn't a quote: a fitter prices yours after seeing the opening.
Lever or pad
A lever handle has a lever on both sides. A lever and pad has a lever on the inside and a fixed pad on the outside. Changing from one to the other means checking it against the multi-point lock, because the lock must work from the outside with a key.
When a handle is not the problem
- The handle droops. The screws may be loose, or the spindle worn.
- The handle moves but the door will not lock. The lock or the keep needs an adjustment.
- The key turns hard. A cylinder or a lock that has worn.
Each of those is a lock job: door locks. Repair work is priced on a visit, because the cause is only clear with the door open.
Other doors to look at
Front doorsFitted, €900 to €2,400. Most guides land between €900 and €1,500.
Back doorsFitted, €700 to €1,600. A plain back door is about half a day's work.
French doorsA pair of doors onto the garden, fitted for €1,200 to €3,500.
Sliding doorsA patio door that slides, fitted for €1,800 to €3,500.
uPVC or compositeComposite costs €600 to €800 more like for like, and it lasts longer.
Handles and locksA new lever handle sells for about €27. Locks, cylinders and what they do.Questions before you buy
How do I measure for a uPVC door handle?
Measure the screw centres and the PZ, the distance from the spindle hole to the keyhole.
What is the most common PZ?
92 mm for modern multi-point locks, and 68 and 70 mm also occur.
How much is a uPVC door handle?
About €27 for a lever handle, to buy. Fitting is a few minutes for a handyman, or part of a visit.
Can I change a lever and lever handle to a lever and pad?
Only after checking it against the multi-point lock. A fitter can tell on the visit.
Who fits a door handle?
A door fitter who covers your county can do it as part of a repair visit. Priced on a visit.
Everything on this site
Doors by kind
Costs, handles and locks

See the price before anyone rings
Pick the door, what goes with it and where you live. When you want a firm price, it goes to a single door fitter in your county.
