Measuring for a new door

Measure the opening, not the old door: the width and the height in three places each, and write down the smallest. Then tell the fitter the numbers, the way the door opens and what is on each side of it.

Three measurements each way, the smallest one, and what to tell the fitter.

Free and no obligation. Your request goes to one door fitter in your county, not a list.

  • 3 placesto measure each way
  • Smallestis the one you give
  • 2,055 mma common ready-made height
  • 1 photofrom inside and one outside
Two white front doors with small glazed panels, on a red brick house

Measuring the opening

  1. Measure the width at the top, the middle and the bottom of the opening.
  2. Measure the height at the left, the middle and the right.
  3. Write down the smallest width and the smallest height.
  4. Note how deep the wall is, so the fitter knows what frame depth fits.

Ready-made sets read for this site are about 2,055 to 2,085 mm high, so a standard opening takes a ready-made door and a taller or wider one means made to measure.

Price your door

Three taps and the price shows as you go. Your name and number come last, and only if you want a fitter to price it.

A door, kind still to pick, door only, supplied and fitted: Priced on a visit.

Step 1 of 5

What door are you after?

Pick the closest. The fitter asks the rest.

How the price is worked out

The figure is what Irish fitters and price guides give for that door fitted, or for fitting alone if you already have the door. Side panels are on top of it. Where nobody publishes a figure, it reads priced on a visit. Use it to plan with. It isn't a quote: a fitter prices yours after seeing the opening.

What to tell the fitter

  • Which way it opens. In or out, and which side the hinges are on.
  • What is on each side. A step, a path, a tiled floor or a carpet.
  • The glass. Frosted, clear or patterned.
  • Side panels. Whether you want one on either side.
  • The old door. Whether it goes with the fitter.

Why the smallest number

An opening is rarely square. The frame has to go in at the narrowest point, so a fitter works from the smallest width and height and fills the gap at the edges with packing and sealant.

Do not order a ready-made door from your own measurements unless you are sure. A made-to-measure door takes 4 to 6 weeks, and a wrong size is a long wait.

What the fitter will do on a visit

Measure again, check the frame and the lintel, and look at the floor level at the threshold. Then price the job in writing, with the door, the fitting and the making good on separate lines.

For the numbers a quote should show: PVC door prices.

Questions before you buy

How do I measure for a new door?

Measure the opening, not the old door: the width and the height in three places each, and write down the smallest. Then tell the fitter the numbers, the way the door opens and what is on each side of it.

Do I measure the door or the opening?

The opening. An old door can be warped or trimmed, and the frame is what goes in.

What size is a standard door?

Ready-made sets read for this site are about 2,055 to 2,085 mm high and 840 to 920 mm wide for a single door.

Do I need an exact measurement?

A good one, yes. The fitter measures again on the visit before anything is ordered.

What if the opening is not standard?

Then the door is made to measure, which takes longer and costs more than a ready-made set.

Everything on this site

Two armchairs in a bright room with sliding glass doors open to a flower garden

See the price before anyone rings

Pick the door, what goes with it and where you live. When you want a firm price, it goes to a single door fitter in your county.